Browse our standard steel, stainless, galvanized and aluminum stock. Choose a cut length or select from a standard — build your cut list, and order directly online. Pickup in Franklin, MA.
Your order will be sent directly to Franklin Sheet Metal for processing under your existing terms.
Order Summary
Subtotal
Setup Savings
Tax
Estimated Total
PDF downloads automatically and is emailed to you and Franklin Sheet Metal.
📋 Your Cut List
Material:
ℹ️
Equal-leg angle iron. Click Select & Cut to choose your cut or stock length. If material is not in stock at the time of ordering, please allow an additional 1–5 days for restocking. Please allow for a 1–3 day lead time for most orders. We will call when your order is ready for pickup.
Description
Material
Leg (in)
THK (in)
In Stock
Action
Material
Shape
ℹ️
Hollow structural section (HSS) — square, rectangular, and round. Click Select & Cut to choose your cut or stock length. If material is not in stock at the time of ordering, please allow an additional 1–5 days for restocking. Please allow for a 1–3 day lead time for most orders. We will call when your order is ready for pickup.
Description
Material
Size (in)
Wall THK (in)
In Stock
Action
Material
Shape
ℹ️
Bar stock — flat, square, and round. Click Select & Cut to choose your cut or stock length. If material is not in stock at the time of ordering, please allow an additional 1–5 days for restocking. Please allow for a 1–3 day lead time for most orders. We will call when your order is ready for pickup.
Description
Material
Size (in)
THK (in)
In Stock
Action
📋 Custom sheet metal parts calculator. Select your material, dimensions, and quantity. Pricing includes material, cutting, and optional deburring.
Used only to confirm this gauge can be sheared/finished on our equipment — no material charge applies in this mode.
— lbs
Holes & slots cost$0.00
$0.00
$0.00
$0.00
Unit Cost
$0.00
Total Cost
$0.00
ℹ️
Custom formed parts calculator. Select a profile, material, and dimensions. Pricing includes material, shearing, and press brake operations.
Custom Angle
Custom Channel
Custom Z
Custom Hat
Custom Profiles
Custom Tray
Plasma Cut
Plasma Cutting
Flat Bracket
Custom Plates
Formed Brackets
Rolled Cylinders
Plasma Cut Disk
— lbs
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
— lbs
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
ℹ No welding available on galvanized material. Corners on this tray will be left unwelded.
All walls fixed at 90° — Depth applies to every included wall.
Floor Hole Pattern
Drag to rotate
All dimensions Outside. All walls fixed at 90°. Floor holes shown to scale.
Est. Weight
— lbs
Deburr Cost
$0.00
Hem Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
About This Part
Fabrication Tolerances
Lead Time
Plasma Cutting Notice:
📁
Click to Upload DXF
Job Totals
Total Parts: —
Sheets Needed: —
Cut Length: —
Pierces: —
— lbs
Sheet 1 of 1
The plasma arc is cone-shaped, so every cut edge tapers slightly through the material thickness — the bottom (where the cut starts) lands closer to the programmed dimension than the top. Absolute size is exaggerated for legibility, but the taper angle shown is the real geometric ratio of kerf to material thickness. This reflects the current gauge, not a specific part's dimension, since a nested job can mix arbitrary shapes. Cutting Tolerance: ±1/16"
Deburr(Included)
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
📁
Click to Upload DXF
Job Totals
Total Parts: —
Sheets Needed: —
Cut Length: —
Pierces: —
— lbs
Sheet 1 of 1
The plasma arc is cone-shaped, so every cut edge tapers slightly through the material thickness — the bottom (where the cut starts) lands closer to the programmed dimension than the top. Absolute size is exaggerated for legibility, but the taper angle shown is the real geometric ratio of kerf to material thickness. Cutting Tolerance: ±1/16"
Deburr(Included)
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
⚠ Hole/slot positions shown in the preview are illustrative only. Exact hole locations must be provided by the customer after ordering.
Est. Weight
— lbs
Deburr Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
⚠ Hole/slot positions shown are calculated from your entered values and intended to be accurate. Please double-check all measurements before ordering.
Est. Weight
— lbs
Deburr Cost
$0.00
Corner Radius Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Holes
⚠ Hole positions shown are calculated from your entered values and intended to be accurate. Please double-check all measurements before ordering. Edges are deburred as standard on every disk.
Hole Positions
Plasma cutting naturally tapers slightly through the material thickness — the bottom surface (where the cut starts) typically lands closer to the programmed diameter than the top. Absolute size is exaggerated for legibility, but the taper angle shown is the real geometric ratio of kerf to material thickness. Ranges in parentheses are the nominal size ± tolerance. Cutting Tolerance: ±1/16"
Est. Weight
— lbs
Deburr (Included)
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Used only to check this can be bent on our press brake — no material charge applies in this mode.
Flat — ready to bend
Simulates the press brake stroke using the actual punch tool profile for this part. A crash is flagged only if a leg strikes the punch body — inputs are unchanged, this just visualizes the same Leg A, Leg B, and Inside Angle values from the form.
Est. Weight
— lbs
Deburr Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Used only to check this can be bent on our press brake — no material charge applies in this mode.
Applies to all 4 free edges — always on the outer edge, away from the bend.
Callout
#
Leg
Type
X (from near end)
Y (from outer edge)
Size
No holes or slots added yet.
Flat — ready to bend
Simulates the press brake stroke using the actual punch tool profile for this part. A crash is flagged only if a leg strikes the punch body.
Est. Weight
— lbs
Deburr Cost
$0.00
Holes + Corners
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Flange A
Flange B
Kink Workaround Available
Flange B flat — ready to bend
Simulates Bend 2 (Flange B). Flange A is already formed and rigidly attached via the web — all three segments are checked against the Bend 2 punch. Bend 1 (Flange A) is the same physics, already validated on Custom Angle.
Illustrative, not a physics simulation — shows the sequence and approximate proportions using this part's actual flange/web dimensions and kink angle, not a to-scale forming drawing.
Callout
#
Side
Type
X (from near end)
Y (from edge)
Size
No holes or slots added yet.
Est. Weight
— lbs
Deburr Cost
$0.00
Hole/Slot Cost
$0.00
End Cap Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Flange A
Flange B
All dimensions shown (Flange A, Flange B, Web, Length) are Outside dimensions.
Flange B flat — ready to bend
Simulates Bend 2 (Flange B) forming into the press brake die. Flange A (Bend 1, already formed) is shown mirrored to the opposite side of the web, matching the finished Z shape. No crash is possible on this profile, since Flange B always rotates away from the punch.
Est. Weight
— lbs
Deburr Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Flange A
Foot A (90° fixed)
Flange B
Foot B (90° fixed)
Kink Workaround Available
All dimensions shown are Outside dimensions. Foot A and Foot B bends are fixed at 90°.
Flange B flat — ready to bend
Simulates Bend 2 (the longer flange, with its foot rigidly attached) forming into the press brake die. The shorter flange — with its own foot already bent, both formed earlier — is shown fixed. Both feet were bent first, while the sheet was flat, before either flange-to-web bend; the sequence mirrors Custom Channel with two extra 90° foot bends added first. Foot A and Foot B are checked against the punch just like the flanges, since the actively-bending flange's foot can swing into the punch even though the flange itself can't.
Illustrative, not a physics simulation — shows the sequence and approximate proportions using this part's actual flange/web dimensions (feet omitted for clarity) and kink angle, not a to-scale forming drawing.
Est. Weight
— lbs
Deburr Cost
$0.00
End Cap Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Used only to check this can be rolled on our equipment — no material charge applies in this mode.
Height is the dimension along the roller axis — it's limited by how wide a sheet each roller can take.
End Flats
Closes the cylinder along the full height. Without it the part ships as a rolled open section and will spring back slightly.
⚠ Roundness Is Not Guaranteed. Flats are a normal result of the 3-roll process. Our flat estimates are typical shop figures, not a measured guarantee — actual results can vary. We do our best to mitigate them, but by ordering you accept the part as-is.
Stretch-Out
— in
Est. Weight
— lbs
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this cylinder and we'll get back to you as soon as possible.
About This Part
Fabrication Tolerances
Lead Time
⚠ TEST MODE — This part is not yet available for purchase. Submit an RFQ instead.
Leg A — Bend 1
Leg B — Bend 2
Leg C — Bend 3
Simulating Bend 2
Ready to bend
Est. Weight
— lbs
Deburr Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this part and we'll get back to you as soon as possible.
Standard Products
Ready-to-order fabricated products. Select a category, configure your options, and add to your order.
Category:
⬛
Square Bollard
3" or 4" square tube · base plate · welded cap
Square tube with a punched, welded base plate and a welded top cap. Pick a common size below, or build any custom height.
🔥
Fire Pit Insert
Custom size · material options
🔧
Coming Soon
Configurable options in development
🛡
Fire Pit Covers
Custom size · 90° or 45° skirt · handles
Formed cover with a bent skirt on all four sides, welded corners, and one or two lift handles. Outside dimensions are the widest point of the cover.
📦
More Products
Additional items coming soon
🔧
Coming Soon
Have a product in mind? Contact us.
Fire Pit Cover
Formed cover with a bent skirt on all four sides. Length and Width are the outside dimensions at the widest point (the bottom edge of the skirt).
About This Product
Fabrication Tolerances
Lead Time
Finish
⚠ TEST MODE — This product is not yet available for purchase. Submit an RFQ instead.
ℹ No welding available on galvanized material. Corners on this cover will be left unwelded — no welding charge is applied.
L and W are outside dimensions at the widest point. H is the finished cover height — the formed skirt length is calculated from it.
Handle position is measured to the center of the handle, from the front-left outside corner of the cover. Defaults are centered.
Drag to rotate
All dimensions Outside. Skirt bent down on all four sides, corners welded.
Est. Weight
— lbs
Deburr Cost
$0.00
Unit Cost
$0.00
Total Cost
$0.00
Our team will review your request to see if we have other tooling available. Please submit an RFQ for this cover and we'll get back to you as soon as possible.
⚠ TEST MODE — This part is not yet available for purchase.
Square Bollard
Square tube with a punched, welded base plate and a welded top cap.
Tube Size
Height
Unit Price
Qty
No standard heights configured yet for any tube size.
Illustrative — bolt hole placement shown at a standard inset; not a fabrication drawing.
